The bag is almost finished!

I have taken the time to sew quite often these past few days, and now the bag actually looks like a bag,  but is not yet totally finished – I still need to add buttons and their holes!

But to get this far I had to do a lot of pinning, basting and sewing – and along the way I made a few mistakes, because let’s face it: I am still learning how to sew. 😉

Last time I blogged about the bag project I had only cut the fabric and hadn’t done any sewing. That was just step 1 out of 12 – now I will tell you how I made my way through step 2 to 11.

I stay-stitched across the top of the felt bag pieces and flap and the ends of the straps. I had never heard about stay-stitching before so this was a new thing learned. Then I top-stitched a fancy line pattern to the front piece of the bag.

After turning flap right side out, I pressed the seams flat and top-stitched around the edge approx. 6 mm in.

Bag

The pattern has a fancy line pattern that you top-stitch across the front.

Bag

Next the felt bag pieces was sewn together. As always first pin and baste…

Bag

The book tells you to sew the seam twice for strength. This is another sewing tip learned. Then remember to notch the rounded corners after sewing.

Bag

Next turn right sides out and press seamed edges flat. Tadaa.. so far so good. 🙂

Bag

Then I repeated the steps for the outer felt fabric with the lining fabric.

Bag

The twist is to remember to leave an opening at the bottom so you later can turn it right side out after sewing it together with the outer layer. I did remember to leave an opening, but I forgot to notch the corners. Luckily I remembered at a later stage, so no actual fault was made here.

Bag

Then it was time for the flap. First I ironed on the interfacing to the lining. This was my first time ever ironing on interfacing, so I learned to do something new again!

Bag

More pinning and basting…

Bag

And voila! The flap is sewn together. Here I learned how to do layering: trimming the seam allowance to reduce bulk.

Bag

The I moved on to do the straps…. and I began making mistakes. 😦

Can you see what I did wrong here:

Bag

I didn’t put the right sides together. I actually pinned and basted both straps before noticing. Luckily I hadn’t begun to machine sew before I could correct my mistake.

Here is what it should have looked like:

Bag

Then the book tells you to sew down both edges and then to also sew across one end before turning the straps right-side out.

Bag

Bag

And then I made my second mistake! I didn’t read the instructions carefully enough, because if I had, I would have unpicked the end stitching, but to make matters even worse I begun to slip-stitch the other end, and managed to to this very nicely to both straps before realising the error I had made. 😦

Bag

The lesson I learned here was that you only sew the end of the strap to make it easier to turn right-side out. It is just to aid you, so remember to unpick the stitches afterwards, otherwise you will have too much and unnecessary bulk at your seams.

I unpicked both ends of both straps and continued on with step 9 which is to attach straps and flap to the outer layer of the bag. As always: pin, baste and sew.

Bag

Step 10 is to attach the lining. It was here that I noticed that I had forgot to notch the lining around the corners, but better late than never.

Bag

You sew the seam twice for strength and then layer the seam allowance.

Bag

Now the bag actually began to look like a bag, because now I turned the bag right-side out through the gap left in the bottom of the lining.

Bag

And then I got to slip-stitch the gap shut. I really do like to slip-stitch; it feels like I am performing magic each time. 😉

Bag

And this how far I am with the bag project now. But…. I have just noticed one more mistake! And again it has to do with the straps. I forgot to top-stitch down the edges after turning them right-side out. And now they are already sewn on the bag with lining and all, so I will see if it is possible to do as an afterthought. otherwise I will have to leave it as it is, and none but me and the few that read my blog will be the wiser. 😉

Bag

Next and last step to this project is buttons. I have never done buttonholes before, so wish me luck!

🙂

Bound-edged apron – a finished project!

I have finished my 3rd learning-how-to-sew project, and I am happy with the result!

Last time I wrote about the apron project I had already sewn the ties, but still needed to turn them right side out and attach them to the apron.

I struggled a bit turning the first one right side out, but figured out how to to it easy with the second one…

Apron

 

Then I pressed the ties and slip-stitched the ends shut. I am amazed… slip-stitching is like performing magic – you don’t see the stitches even though you are sewing from the outside!

Apron

 

Attaching the ties was actually more difficult than I had expected. The box stitches was very difficult to make look nice, and this was my first try at doing it, so I guess I shouldn’t have expected too much, but I had hoped for a nicer box.

Apron

Apron

 

But I can’t complain about the overall finished result….

Apron

Tadaaa…….! A finished apron = yet another finished project. 🙂

 

Next project is a bag, and I am really looking forward to the challenge.

Getting closer to a finished scarf

The scarf that I am making has finally taking the shape of a scarf. Now all I need to do is put the finishing touch ob it: the embellishing, which is a leafy pattern on each end.

I didn’t have any major problems while sewing this time, but I do think my sewing could be a bit neater – I’m sure that part will come in time. Practice makes perfect, as they say.

Here’s how it looked before turning it right-side out:

Sewing 2012-03-27

And a close-up…

Sewing 2012-03-27

Here I had turned it – notice the gap in the middle that I had to slip-stitch closed.

Sewing 2012-03-27

Me slip-stitching it closed:

Sewing 2012-03-27

Here is the pressed and almost finished scarf:

Sewing 2012-03-27

Now I just have to figure out if I can transfer the leafy pattern without dressmakers carbon-copy paper. Otherwise I will have to go buy some before I can continue.